Alienware AW3423DW - Page 68

68 | Using AlienFX application
Pulse Description
The effect makes the light flash with a short pause.
To adjust the pulse:
1. Pick a preferred color from the color palette
or the list of PRESET COLORS. The selected
color and its RGB color codes will be
displayed on the right field.
NOTE: To change the color, use the up and
down arrow buttons beside the R/G/B boxes
to edit the color codes.
2. To add the selected color to the list of YOUR
COLORS for quick access in the future, click
. At most 12 colors can be added to the list.
NOTE: To remove an existing color chip from
the list, right-click on it.
3. Drag the BRIGHTNESS slider to adjust the
brightness of the color.
4. Drag the TEMPO slider to adjust the pulsing
speed.
Color Description
The effect makes the LED light in a single static
color.
To adjust the color:
1. Pick a preferred color from the color palette
or the list of PRESET COLORS. The selected
color and its RGB color codes will be
displayed on the right field.
NOTE: To change the color, use the up and
down arrow buttons beside the R/G/B boxes
to edit the color codes.
2. To add the selected color to the list of YOUR
COLORS for quick access in the future, click
. At most 12 colors can be added to the list.
NOTE: To remove an existing color chip from
the list, right-click on it.
3. Drag the BRIGHTNESS slider to adjust the
brightness of the color.