EasyManuals Logo

Alienware x14 User Manual

Alienware x14
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
Table 7. System setup options—Exit menu
Exit
Exit Saving Changes Allows you to exit system setup and save your changes.
Save Change Without Exit Allows you to save your changes without exiting the BIOS
setup.
Exit Discarding Changes Allows you to exit the BIOS setup without saving the changes.
Load Optimal Defaults Allows you to restore default values for all system setup
options.
Discard Changes Allows you to load previous values for all system setup
options.
System and setup password
Table 8. System and setup password
Password type Description
System password Password that you must enter to log on to your system.
Setup password Password that you must enter to access and make changes to the
BIOS settings of your computer.
You can create a system password and a setup password to secure your computer.
CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE: System and setup password feature is disabled.
Assigning a system setup password
Prerequisites
You can assign a new System or Admin Password only when the status is in Not Set.
About this task
To enter the system setup, press F12 immediately after a power-on or reboot.
Steps
1. In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2. Select System/Admin Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
A password can have up to 32 characters.
At least one special character: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }
Numbers 0 through 9.
Upper case letters from A to Z.
Lower case letters from a to z.
3. Type the system password that you entered earlier in the Confirm new password field and click OK.
4. Press Esc and save the changes as prompted by the pop-up message.
5. Press Y to save the changes.
The computer restarts.
66

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alienware x14 and is the answer not in the manual?

Alienware x14 Specifications

General IconGeneral
Display Size14 inches
GraphicsNVIDIA GeForce RTX 3060
RAM16GB DDR5
Operating SystemWindows 11 Home
Battery80WHr
Brightness400 nits
Resolution1920 x 1080
ProcessorIntel Core i7-12700H
Storage512GB SSD
Display OptionsFHD 144Hz
Color Gamut100% DCI-P3
Ports1x HDMI 2.1, 1x microSD card reader
WirelessKiller Wi-Fi 6E AX1675

Related product manuals