ATS | Chantilly, VA | USA | Tel: 1-866-366-6602 | Email: sales@alltrafficsolutions.com | Web: www.alltrafficsolutions.com
Copyright © 2024 |
StatTrak-E Quick Start Guide, TraffiCloud Subscriber Edition
, ver. 1.01 | 4800268 | All rights reserved.
STATTRAK-E QUICK START GUIDE,
TRAFFICLOUD SUBSCRIBER EDITION
The
StatTrak-E by All Traffic Solutions
is a discreet, wireless traffic data collection device that provides
law enforcement authorities and traffic engineers with detailed statistics and reports on vehicle counts and
speeds by class of vehicle (small, medium, and large). StatTrak-E captures trafficdata simultaneously for
the same or opposite directions.For roadside installations, StatTrak-E captures trafficdata simultaneously
for up to two lanes of traffic, moving in the same or opposite directions, and for median installations
captures up to four lanes bidirectionally. For TraffiCloud subscribers, data uploads automatically to the
cloud.
Initial StatTrak-E setup
Once you receive your StatTrak-E, you'll need to perform the following initial setup:
Step 1:Charging the StatTrak-E
on the next page
Step 2:Signing in to TraffiCloud for the first time
on page3
Step 3:Choosing a Site for your StatTrak-E
on page3
Step 4:Mounting a solar panel
on page6
Step 5:Installing the mounting brackets
on page7
Step 6:Mounting and aiming the StatTrak-E
on page8
Step 7:Connecting a solar panel to the StatTrak-E
on page10
Step 8:Powering on the StatTrak-E
on page11
Step 9:Setting up the StatTrak-E mobile app
on page11
Step 10:Confirming your installation
on page14
After deployment, please see:
Replacing StatTrak-E batteries
on page15
Check the package contents
Upon receiving your new StatTrak-E, check to ensure that you have all of the items ordered. If you notice any damaged or missing
items, contact All Traffic Solutions Technical Customer Support immediately. Here's a summary of what's typically included with
your StatTrak-E. Also check your packing slip for precise details of your order.
What's included What you'll need
The StatTrak-E can accommodate up to two 12.8V, 11.5Ah rechargeable lithium batteries
and includes a smart battery charger, two adapters, and keys for the ON/OFFswitch. If you
purchased a solar panel, only one battery is included.
A sheltered workspace and
electrical power supply.
A main pole bracket, three stainless steel banding straps, and a custom security bit. See
Step 5:Installing the mounting brackets
on page7.
A nut driver and power
screwdriver or drill.
Six 3/4-in. long x 1/4-in. diameter (7.6-cm x 2.5 cm)-20 size bolts, with 7/16-in. (11mm)
nuts and washers.
Two wrenches or nut drivers with
7/16-in. (11mm) sockets.
An angle bracket, two bolts with washers, a Torx T-30 security bit with 1/4-in. (6 mm) shank,
and two pole adapters for roadside use with Telespar-type poles.
An Android mobile device and the
StatTrak-E app (not required for
basic roadside setup).
To Next Page
Need help?
General