Publication 1763-RM001B-EN-P - April 2007
Communications Instructions 391
Configuring a Remote
Message
Remote capability is configured through the RSLogix 500 Message Setup
screen.
Example Configuration Screen and Network
The message configuration shown below is for the MicroLogix 1100 at
node 12 on the DH-485 network. This message reads five elements of
data from the SLC 5/04 (node 51 on the DH+ network) starting at address
N:50:0. The SLC 5/04 at Node 23 of the DH+ network is configured for
passthru operation.
TIP
The MicroLogix 1100 capabilities are the same as the
MicroLogix 1200 or MicroLogix 1500 in this example.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
