539 Publication 1763-RM001C-EN-P - October 2009
Appendix
E
Knowledgebase Quick Starts
The following Quick Start topics are included:
• # 17444 “Quick Start” Pulse Train Output (PTO) on page 539
• # 17446 “Quick Start” Pulse Width Modulation (PWM) on page 542
• # 17447 “Quick Start” High Speed Counter (HSC) on page 544
• # 17465 “Quick Start” Message (MSG) on page 548
• # 17501 “Quick Start” Selectable Timed Interrupt (STI) on page 551
• # 17503 “Quick Start” Real Time Clock (RTC) on page 554
• # 17558 “Quick Start” User Interrupt Disable (UID) on page 555
• # 18465 “Quick Start” RTC Synchronization Between Controllers on
page 556
• # 18498 “Quick Start” Data Logging (DLG) on page 559
# 17444 “Quick Start”
Pulse Train Output (PTO)
NOTE: The PWM function is only available when using the BBB models
of the MicroLogix 1100
Locate the Function Files under Controller in RSLOGIX 500 v7.00 or later
and select the PTO tab, then select the [+] next to PTO:0 (See Below).
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
Need help?
General
