Publication 1769-UM009B-EN-P - May 2002
Using the 1769-SDN Scanner Module with MicroLogix Controllers 7-13
Communication Command
The 1764-LRP processor supports the six standard types of
communications commands (same as all other MicroLogix 1200
and 1500 controllers) and CIP Generic. When any of these six
standard commands are chosen, you can initiate standard messages to
destination devices connected to DeviceNet products that support
PCCC messaging (including MicroLogix and SLC controllers using
1761-NET-DNI’s, other MicroLogix 1500 controllers using 1769-SDN
scanner modules, etc.). You can initiate reads, writes, program
upload/download and online monitoring across DeviceNet. This is
functionally identical to DH-485 and DH+ networking.
Allen-Bradley Drives
To Next Page
Loading...
