Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018 41
Chapter 5
Connect the 8720MC-RPS Unit
This chapter provides procedures for wiring your 8720MC-RPS units and
accessory items.
Topic Page
Basic Wiring Requirements 42
Input Power Configuration 42
Ground the Drive System 44
Wiring Requirements 46
AC Input Power Diagrams 46
Install DC-bus Power Output Wiring 64
Ground the 8720MC-RPS Unit 64
EMC Compliance 65
Sequence Signal Wiring 67
Operation Timing of Sequence Control Signals 68
Install Ribbon Cables 71
To Next Page
Loading...
