Allen-Bradley Logix5000 User Manual

Rockwell Automation Publication ENET-UM004B-EN-P - November 2015 47
Add an EtherNet/IP Communication Module to a Controller Project Chapter 4
14. If you did not already configure the Ethernet port speed and duplex
settings with RSLinx software, complete these tasks:
a. Put the controller mode switch in the REM position.
b. Change the Logix Designer application project to Run mode.
.
c. When prompted to Change controller mode to Remote Run, click Yes.
d. Right-click the adapter, and choose Properties.

Allen-Bradley Logix5000 Specifications

General

Brand	Allen-Bradley
Model	Logix5000
Category	Controller
Language	English