Allen-Bradley MicroLogix 1761-NET-ENI User Manual

1 Publication 1761-UM006A-EN-P - February 2001
Chapter 2
Installation and Wiring
This chapter covers installation and wiring for the ENI. It is divided
into the following sections:
• European Communities (EC) Directive Compliance
• Safety Considerations
• Mounting
• External Power Supply Wiring
• ENI Port Identification
• Ethernet Connections
• RS-232 Port Connections
European Communities (EC)
Directive Compliance
This product has the CE mark. It is approved for installation within the
European Union and EEA regions. It has been designed and tested to
meet the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) by applying the following
standards, in whole or in part, documented in a technical construction
file:
• EN 50081-2 EMC — Generic Emission Standard, Part 2 —
Industrial Environment
• EN 50082-2 EMC — Generic Immunity Standard, Part 2 —
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 61131-2
Programmable Controllers, Part 2 - Equipment Requirements and

Allen-Bradley MicroLogix 1761-NET-ENI Specifications

General

Brand	Allen-Bradley
Model	MicroLogix 1761-NET-ENI
Category	Recording Equipment
Language	English