4 PanelView 600 Terminals
41061-004-01(D)
For More Information
If you would like a publication, you can:
• download a free electronic version from the PanelBuilder32 installation CD
• download a free electronic version from the internet:
www.ab.com/manuals/eoi or www.theautomationbookstore.com
To purchase a publication:
• visit the www.theautomationbookstore.com and place your order
• contact your local distributor or Rockwell Automation Representative
Hazard Locations
See nameplate label on terminal for certifications on hazardous locations.
The PanelView 600 terminals have an operating temperature code of T4
(maximum operating temperature of 135
° C or 275° F). Do not install the
terminals in environments where atmospheric gases have ignition temperatures
less than 135
° C (275° F).
For Refer to Refer to
More detailed information on the 600 and the
other Standard PanelView terminals.
Standard PanelView
Terminals User Manual
2711-UM014A-EN-P
In Class 1, Div 2 and Class 1, Zone 2 hazardous locations, the
PanelView 600 must be wired per the National Electric Code
and/or Canadian Electric Code as it applies to hazardous
locations. Peripheral equipment must also be suitable for the
location in which it is installed.
To Next Page
Loading...
Need help?
General
