8 PanelView 600 Terminals
41061-004-01(D)
Clearances
Allow adequate space for mounting, air flow, maintenance, and for installing a
memory card and legend inserts.
TERMINAL CUTOUT
Use Full Size
Template shipped with
Terminal
Front View
Side, Top and Bottom Clearances
116 mm
(4.57 in)
91 mm
(3.60 in)
6.9 mm
(0.27 in)
Approximately 220 mm
(8.65 in.) is required to
insert and remove a
memory card with the
memory card retainer.
card
Memory Card Retainer
Leave 51 mm (2.0 in.)
for Mounting and Wiring Connections
Leave 25 mm (1 in.)
for Mounting and Air Flow
Leave 38 mm (1.5 in.) for Mounting,
Air Flow and Legend Insert
Leave 51 mm (2 in.)
for Mounting and Air flow
Back Clearance
Top View
To Next Page
Loading...
Need help?
General
