Rockwell Automation Publication 2711P-UM006A-EN-P - November 2010 67
Configuration Mode Chapter 4
Set Double-tap Sensitivity for a Touch Screen
You can set and test the sensitivity for both the speed and physical distance
between touch-screen presses. The process is identical to setting the double-tap
sensitivity for the mouse.
1. Select Terminal Settings>Input Devices>Touch Screen>Double Tap
Sensitivity.
2. Double-tap the Set button to set the sensitivity of touch-screen presses.
3. Double-tap the Test button to test the sensitivity of touch-screen presses.
If you double-tap the test button with the time set using the Set button, the
Test button will reverse its foreground and background colors.
4. Press OK when done.
To Next Page
Loading...
