Allen-Bradley POINT I/O 1734-232ASC - Page 68

Publication 1734-UM009A-EN-P - June 2002
2 Index
M
Mode, auto start 2-2
Mode, data only 2-24
Mode, handshake 1-14, 2-27
Mode, immediate 1-14, 2-27
Mode, no pad 1-14
Mode, pad 1-14
Mode, pad, setting up 2-16
Mode, record header 2-24
module installation 1-3
Mounting base, installing 1-1
mounting base, removal 1-5
Mounting base, removing 1-5
mounting, base assembly 1-1
N
New data 2-21
No pad mode 1-14
node commissioning tool 2-5
node setting (out of box) 2-5
O
Operating mode, selections 1-13
Output data, writing serial output 1-9
Overflow, RX buffer 2-20
Overflow, TX buffer 2-20
P
Pad mode 1-14
Pad mode, character 2-16
Pad mode, selection 2-16
Pad mode, setting up 2-16
parameter setting 2-6
Parameters, POINT I/O 2-15
Parameters, setting 1734-232ASC module
2-6
Parity error, RX 2-21
Pinouts, cable 1-7
Polled I/O 1-10
positioning the keyswitch 1-3
Publications, related P-2
R
Reading, serial device input data 1-8
Receive character buffer length, receive
2-15
Receive characters parameter, rules for
usage
2-17
Receive serial data string, explicit
messages
2-20
Receive, string data type 2-18
Receive, swap bytes 2-17
Receiving, serial data 2-15
Record header 2-24
Related P-2
Related publications P-2
Removable terminal block, installing 1-4
Removing, mounting base 1-5
RTB, installation and removal 1-4
RX buffer overflow 2-20
RX parity error 2-21
S
Scanner I/O receive size, setting up 2-19
Scanner I/O transmit size, setting up
2-26
Selectiongs, operating mode 1-13
Serial data string, transmit, explicit
messages
2-28
Serial data, receiving 2-15
Serial data, transmitting 2-21, 2-26
Serial device, reading input data 1-8
Serial network, installing 1-7
Serial output data, writing 1-9
setting module parameters 2-6
Setting up, connection timer (EPR) 1-12
Setting up, delimiter operation 2-18
Setting up, DeviceNet communications
1-10
Setting up, DeviceNet I/O connections
1-11
Setting up, pad mode 2-16
Setting up, receive character buffer
length
2-15
Setting up, scanner I/O receive size 2-19
Setting up, scanner I/O transmit size
2-26
Setting up, swap bytes mode 2-17
Setting up, transmit character buffer
length
2-22
Setting up, transmit delimiter 2-22