Allen-Bradley POINT I/O PROFIBUS 1734-APB - Page 53

Publication 1734-UM005B-EN-P - June 2001
Communication and I/O Table Mapping 4-15
Viewing Diagnostic Data within the Configuration Tool
Station status 1 - 3
Interpreted view of diagnostic
messages
Error details
Complete diagnostic message
in hexadecimal.
Select the “Start Debug Mode”
entry in the “Online” menu.
Double click on the slave icon.
Station status 1 - 3
1. Select error message
2. A detailed description
appears
(Click on “OK” to exit.)
Allen-Bradley HMIs