Publication 2711-UM014B-EN-P
Applying Power and Resetting Terminal 2-5
DC Power Connections
Connect the power source to the terminal at the 3-screw terminal
block (PV300 Micro removable, all others fixed).
DANGER
!
Explosion Hazard
• Substitution of components may impair suitability
for Class I, Division 2.
• Do not disconnect equipment unless power has
been switched off and area is known to be
non-hazardous.
• Do not connect or disconnect components unless
power has been switched off.
• All wiring must comply with N.E.C. article
501-4(b).
To Next Page
Loading...
