Allen-Bradley SMC-50 - Basic Parameter Access and Category;File Structure; Parameter Access

24 Rockwell Automation Publication 150-QS003E-EN-P - April 2017
Chapter 2 Programming
Basic Parameter Access and
Category/File Structure
Parameter Access
The parameters of the SMC-50 are structured into five categories:
1. Monitoring
2. Setup
3. Motor Protection
4. Communications
5. Utility
The Cat. No. 20-HIM-A6 can access any or all parameters that reside in any
category. The following examples show how to access the SMC-50 parameters
with the 20-HIM-A6.
For additional details on these procedures, see the 20-HIM-A6 or
20-HIM-C6S module user manual, publication 20HIM-UM001
.
EXAMPLE
To perform a parameter number search and modification, perform the following
procedure.
1. and that the HIM SMC-50 power-up screen appears as shown:
2. Using the PAR# soft key, type the desired parameter number to display, then press
ENTER, then press EDIT. The following screen appears.
NOTE: To access the next/previous PAR# from the one currently displayed, use the UP/
DOWN arrow soft keys to display the desired parameter for modification.
3. Press ENTER to load the changed value into memory.
AUTO
F
09
Stopped
0 Amps
Allen-Bradley
ESC
PORTS
00 SMC-50
02 20-HIM-x6
03 1203-USB
09 SMC-50 Option
PROPERTIES
AUTO
Stopped
0 Amps
Allen-Bradley
ESC
ENTER
00
SMC-50
Jump to Param #
1