Alliance Laundry Systems HWFB61WN1102 - Cleaning Electronic Coin Drop

134 801683
Section 6 Adjustments
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
• Motor not grounded! Disconnect electric power before servicing motor.
W485
WARNING
66. CLEANING ELECTRONIC COIN DROP
NOTE: The electronic coin drop should be cleaned
once a year. Clean the drop more often if it is
exposed to high levels of residue or lint build-up.
a. Disconnect electrical power to machine and
drop.
b. Remove coin drop from machine. Refer to
Paragraph 40.
c. Move spring downward until cover catch is
free. Refer to Figure 68.
NOTE: Do not lift or overbend the spring in any
direction.
d.
O pen cover for coin drop. Refer to Figure 69.
e. Clean the coin path with a soft brush and wipe
exposed surfaces with an alcohol moistened
cloth. Refer to Figure 70.
DRY2088N
Figure 68
Catch
DRY2089N
Figure 69
DRY2090N
Figure 70
Cover