Allied Telesis AT-S63 Features Guide

AT-S63 Management Software Features Guide
477
Internet Protocol Version 4 Packet Routing
The following table lists the IPv4 packet routing default settings.
Note
The update and invalid timers are not adjustable. The switch does
not support the IPv4 routing holddown and flush timers.
Packet Routing Setting Default
Equal Cost Multi-path (ECMP) Enabled
Default Route None
Update Timer 30 seconds
Invalid Timer 180 seconds
Split Horizon Enabled
Split Horizon with Poison Reverse Disabled
Autosummarization of Routes Disabled

Allied Telesis AT-S63 Specifications

General

Brand	Allied Telesis
Model	AT-S63
Category	Software
Language	English