Allied Telesis AT-S63 - Server-Based Authentication (RADIUS and TACACS+); Server-Based Authentication; RADIUS Client; TACACS+ Client

AT-S63 Management Software Features Guide
487
Server-based Authentication (RADIUS and TACACS+)
This section describes the server-based authentication, RADIUS, and
TACACS+ client default settings.
Server-based
Authentication
The following table describes the server-based authentication default
settings.
RADIUS Client The following table lists the RADIUS configuration default settings.
TACACS+ Client The following table lists the TACACS+ client configuration default settings.
Server-based Authentication Setting Default
Server-based Authentication Disabled
Active Authentication Method TACACS+
RADIUS Configuration Setting Default
Global Encryption Key ATI
Global Server Timeout Period 30 seconds
RADIUS Server 1 Configuration 0.0.0.0
RADIUS Server 2 Configuration 0.0.0.0
RADIUS Server 3 Configuration 0.0.0.0
Auth Port 1812
Encryption Key Not Defined
TACACS+ Client Configuration Setting Default
TAC Server 1 0.0.0.0
TAC Server 2 0.0.0.0
TAC Server 3 0.0.0.0
TAC Global Secret None
TAC Timeout 30 seconds