Allied Telesis AT-S63 Features Guide

AT-S63 Management Software Features Guide
Section I: Basic Operations 63
AT-StackXG Stacking Module
To be part of a stack, the AT-9400Ts Switch must have the AT-StackXG
Stacking Module, shown in Figure 1. You install the module in the switch’s
expansion slot on the back panel. The installation instructions are provided
in the AT-9400Ts Stack Installation Guide.
Figure 1. AT-StackXG Stacking Module
1240
A
T
-LX44CPUCVR
AT-StackXG
Stack Port 1
Stac
k Port 2

Allied Telesis AT-S63 Specifications

General

Brand	Allied Telesis
Model	AT-S63
Category	Software
Language	English