Translated from the original language - English - 3Manual 6-1624970M - rev. 1 - 11/01/2023
• Any use of this product other than permitted use /intended use is prohibited.
• The manufacturer shall not be liable for any damage caused as a result of improper use or as a result of installation not complying
with the requirements of this manual.
• The product covered by this manual is configured in accordance with the Machinery Directive 2006/42/EC as a quasi-machine. It
is therefore not in itself able to fully meet the regulatory reference requirements for the application for which it is intended.
• Regulatory compliance must be ensured at the level of the final installation (machine) to which the Machinery Directive 2006/42/
EC fully applies and in which this product is incorporated.
• All operations indicated in this manual must be carried out exclusively by experienced, qualified and trained personnel.
• The preparation of the cables, the laying, the connection and the testing must be carried out observing the rule of art, in compli-
ance with the rules, regulations and laws in force.
• During installation, testing and maintenance, the entire site shall be properly demarcated to prevent unauthorised persons, in
particular minors and children, from entering.
• Before proceeding with the installation, check the mechanical goodness of the movable door and the guide and support structure.
• Before delivery to the user, check the compliance of the plant with the harmonised standards and the essential requirements in
the Machinery Directive 2006/42/EC.
• Keep this manual in the technical file together with the manuals of the other devices used for the realization of the automation
system.
1. GENERAL WARNINGS FOR THE INSTALLER
1.1 - GENERAL ASPECTS OF SAFETY AND REGULATORY INCOMPATIBILITY
1.2 - SPECIFIC RISKS
DANGER
RISK OF ELECTRIC SHOCK, EXPLOSION OR ELECTRIC ARC
• Shut down all equipment, including connected devices, before removing any lid or door, or before install-
ing/uninstalling accessories, hardware, cables or wires, except for the conditions specified in the user
manual for this equipment.
• To verify that the system is out of voltage, always use a correctly calibrated voltmeter at the rated value
of the voltage.
• Before returning the live unit, reassemble and secure all covers, hardware and cables. Make sure that the
cable inlet is sealed to prevent insect entry and moisture formation.
• Use this equipment and all products connected only to the specified voltage.
• If there is a risk of damage to personnel and/or equipment, use the necessary safety interlocks.
• Do not use this equipment for safety critical functions.
• Do not disassemble, repair or modify the equipment.
• This product is not suitable for installation in applications where it may come into contact with explosive
or flammable atmosphere.
Failure to comply with these instructions will result in death or serious injury.
To Next Page
Loading...
Need help?
General
