PC Configuration
Figure 23: TCP/IP Properties (Windows XP)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the Wireless-N Broadband Router
will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Wireless-N Broadband Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• In the Default gateway field, enter the Wireless-N Broadband Router's IP address and
click OK. Your LAN administrator can advise you of the IP Address they assigned to the
Wireless-N Broadband Router.
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
35
To Next Page
Loading...