Instructions FMA03 26.04.2013 Page 18/21
FMA03-TK1
Transport Case
flight-case for transport and storage of 1 x FMA03, 1 x
FMA21-HL, 1 x FMA21-STS, power supply, remote
control and piste cable.
FMA03-TK2
Transport Case
flight-case for transport and storage of a complete set
for double piste with floor stand: 2 x FMA03, 1 x
FMA21-HL, 1 x FMA21-SBS, power supply, remote
control, piste cables, floor cables, cable reels and
UPSs.
FMA21-KF
Folding Stand
simple stand to hold the FMA03 or FMA21 when
Spectator lamps are not needed (for example when
used as slave machine)
FMA03-AMW3
Trolley
The trolleys are of lightweight construction with 4 swivel
rollers, two of which can be fixed for easy steering and
positioning. Each trolley can be fitted with either one or
two signalling units. When fitted with 2 signalling units
they allow one trolley to be positioned between two
adjacent pistes taking up the minimum of space. All
wiring from the signalling units and cable reels is
contained within the trolley. The side panels of the
trolley are removable for access to store other items of
equipment. Additionally half the bottom panel can fold
to allow easy and tidy connection of the floor/spool
cables, the other half acting as a built in shelf to store
cable reels etc. Repetition lights for the FMA21 type
signalling unit can also be stored inside the trolley in a
special compartment, which is ideal for storage and
transportation.
.
To Next Page
Loading...