Instructions FMA03 26.04.2013 Page 17/21
8 Accessories
8.1 Peripherals for FMA03 and FMA21:
The FMA21 peripherals can be used together with the FMA03. The use of these peripherals offer
extended possibilities and features:
FMA21-STS / FMA21-STS2
System table stand (single or double-sided)
to put the FMA03 on a table and to attach the repetition
lights.
On one stand there can be fixed one or two FMA03,
when fencing on one or two pistes. The repetition lights
are clipped on the stand. No further cables are
required. There is only one repetition light required for
one stand.
FMA21-SBS / FMA21-SBS2
System-Floor stand (single or double-sided)
as table version, but to be put on the floor. All further
details as FMA21-STS.
FMA21-HL
Repetition lights
The repetition lights are clipped on the table stand or
the floor stand, no cable is required. Only one set of
repetition lights is required even when fencing on 2
pistes and using 2 FMA03. The intelligent repetition
lights control recognizes whether there is one or two
FMA03 attached. In case of just one FMA03 the hits
are shown on the front and back side of the repetition
lights. In case two FMA 03 are attached the hits of one
FMA03 are shown on the front side and the hits of the
second FMA03 on the back side. FMA21-HL can also
be used in mixed configurations on double pistes
(FMA21 on one side and FMA03 on the other side).
To Next Page
Loading...