UM
150
User’s Manual
18
UM
150
User’s Manual
Run program on connection: This allows automatically running a program when
you use QuickLink Mobile to connect to a WWAN network. Select the browse
button,
, to browse to the desired application you want to run when you connect
to a WWAN network using QuickLink Mobile. The application will run for all WWAN
connections made from QuickLink Mobile.
VPN Tab
The following options exist on the VPN tab (“Options”, “Preferences”,
“WWAN” tab, “Set Options. . . “, “VPN” tab) :
VPN Client: QuickLink Mobile automatically detects if certain VPN clients
like Microsoft
®
, Cisco
®
, CheckPoint
®
, etc are installed on the computer
and allows you to select the one you wish to use. Check with your network
administrator to setup your VPN connection.
If the VPN client you wish to use does not appear in the list, you can select
Other VPN Application.
Other VPN Application: This allows running a VPN program when QuickLink
Mobile connects to a network. Enter the full path to an executable, or select
the browse button,
, to find the path to the desired application.
To Next Page
Loading...