Alltel UM150 - 5.3 Installing Software

UM 150 User’s Manual
25
UM 150 User’s Manual
5.3 Installing Software
5.3.1 Warnings
• Make sure to complete the unplugging/ejection process before removing the
UM
150 . If you remove the Wireless Internet Card improperly, the product may be
damaged.
• Before inserting the UM
150 into your computer’s Wireless Internet Card port,
remove the Installation CD from the CD-ROM drive.
5.3.2 Notes
• If you have inserted the Wireless Internet Card properly, Windows will inform you
of the new hardware. Wait until Windows completes “Found New Hardware” task.
In Windows XP, several tool tips similar to the “Found New Hardware” function will
appear and disappear in the system tray automatically. Once hardware detection
is complete, you will be prompted to start activation.
• You should hear a short beep sound each time you insert or remove the UM
150 ,
which is quite normal. It is an audible notification that your computer recognizes
the new hardware.