Alltion AM-2000 - Safety Signs on the Instrument; Instrument Label and Warnings; Load-bearing and Date Information

Alltion (Guangxi) Instrument Co., Ltd.
4
Safety Caution
|
AM-2000 User’s Manual
 All wires and plugs work normally.
 The adopted power wires meet the design requirements of this instrument.
Please do not place the equipment in a difficultly operation position.
Operating requirements

Please pay special attention to the PROMPT symbols on the instrument ( especially
Warning sign).
 Avoid to watch the light source of the microscope directly, for example, the objective
lens of the microscope.

Do not disassemble and assemble the binocular head barrel and objective lens during
use to prevent falling and injuring the patient.

Do not disassemble or assemble the supporting components during use to prevent the
Support system from being out of balance, damaging the components or hurting the
patient.
This surgical microscope cannot be used for ophthalmic examination and surgery.
Safety Signs on the Instrument
1 Product label
It contains basic information of the product.
2 Warning
Make sure that the binocular tube is safely installed and the
screw has been tightened, otherwise the binocular tube has the
risk of falling.
3 Warning
Make sure that the safety screw has been tightened, otherwise
the arm support has the risk of falling.
4 Load-bearing tip of cross arm bracket
The balance arm would fail in case of an added weight of greater
than 2.5 kg.
5 Product Date
The production date is changed according to the actual date.