Transport, stor age and disposal
4 Transport, storage and disposal
4.1 Transport
Weight specifications (→ order data sheet).
4.1.1 U npacking and inspection on delivery
1. Unpack the pump/uni t on delivery an d inspe c t it for trans-
port damage.
2. Report any transport damage to the manufacturer immedi-
ately.
3. Dispose of packagi ng material according to local regula -
tions.
4.1.2 Lifting
DANGER
Death or crushing of limbs caused by falling or overturning
loads!
Use lifting gear appropri ate for the total weight to be trans-
ported.
Select the attachment points accord ing to t heir center of
gravity and weight distribution.
Use at least two hoisting cables.
For vertical transport: Provide a s ecuring rope between the
hook and loa d eyebolt of the motor.
Never fasten t he lifting gear onto t he motor eyebolt (unless
used as a safety device against tipping over for units with
ahighcenterofgravity).
Do not stand under suspended loads.
Fig. 5 Fasten ing th e lifting gear to the pump unit
horizontally (as illustrated)
Fig. 6 Fasten ing th e lifting gear to the pump unit
vertically (as illustrated)
Fasten the lifting gear to the pump unit.
12 SPF series BA-2014.01 626.0005 GB – 550 041
To Next Page