23
Subject to change without notice | 83057000jUK – Translation of the original operating manual | ait-deutschland GmbH
12.2
circulating pumps
-
manually.
circulation pump
1. Unscrew the front panel of the module box.
2. (①) in the middle of the cir-
culation pump of the heat source.
3. Insert a screwdriver into the opening and release
circulating pump.
4. (①).
5. Screw the front panel of the module box.
circulating pump
Insert the screwdriver into the hole (①), press the
plunger in the circulating pump against the shaft
rotation of the circulating pump.
13 Dismantling and Disposal
13.1 Dismantling
Unit is safely disconnected from the power supply
again.
Collect all media safely.
Separate components by their materials.
13.2 Disposal and Recycling
Dispose of media harmful to the environment
according to local regulations, e.g. antifreeze
mixture, refrigerant.
Recycle or ensure proper disposal of unit
to local regulations.
13.3
1.
on the processor board of the control
2.
regulations.
To Next Page
Loading...
Need help?
General
