18
We reserve the right to make technical changes.
UK830509/200114 © Alpha-InnoTec GmbH
Domestic Hot Water
Preparation
The domestic hot water preparation with the heat pump
requires a further hot water circuit in addition (paral-
lel) to the heating circuit. During integration, ensure that
the domestic hot water loading is not routed through
the buffer tank of the heating circuit.
Tip “Hydraulic Integration”.
Domestic Hot Water Tank
If the heat pump is to prepare domestic hot water, you
need to incorporate special domestic hot water tanks in
the heat pump system. Select the tank volume so that
the required domestic hot water volume is also available
during a power failure of the public supply utility.
NOTE:
The heat exchanger area of the domes-
tic hot water tank must be dimensioned
in such way that the heating capacity of
the heat pump is transferred with as little
spread as possible.
We shall be pleased to offer domestic hot water tanks
from our product range. They are optimally tailored to
your heat pump.
NOTE:
Integrate the domestic hot water tank in
the heat pump system in such way that it
corresponds to the hydraulic scheme suit-
able for your system.
NOTE:
A motor protection switch for the heat
source circulating pump is integrated in
the heat pump!
Setting range “Technical Data/Scope of Supply”