61
The undersigned
conrms that the following designated device(s) as designed and marketed by us fulll the standardized EC directives,
the EC safety standards and the product-specic EC standards.
In the event of modication of the device(s) without our approval, this declaration shall become invalid.
designation of the deviCe(s)
Heat Pump
Unit model Number Unit model Number
SWC 330 100 388 SWP 1600 100 374
SWC 330/K 100 398 SWP 270H 100 489
SWP 430 100 488 SWP 330H 100 365
SWP 540 100 361 SWP 410H 100 366
SWP 670 100 362 SWP 500H 100 367
SWP 820 100 363 SWP 700H 100 375
SWP 1100 100 372 SWP 850H 100 376
SWP 1250 100 373 SWP 1000H 100 377
eC diReCtives standaRdized en
98/37/EG
EN 378 EN 349
2006/95/EG EN 60529 EN 60335-1/-2-40
2004/108/EG EN ISO 12100-1/2 EN 55014-1/-2
97/23/EG
EN ISO 13857 EN 61000-3-2/-3-3
national standaRds/diReCtives pRessuRe equipment Component
DE AT CH
Category II
BGR 500 Teil 2 NEV (SR 743.26)
Module
A1
DIN 8901 Designated position:
TÜV-Süddeutschland
Bau und Betrieb (No.: 0036)
Company: Place, date: Kasendorf, 29.04.2009
Signature:
UK818125a
Jesper Stannow
Technical Director
We reserve the right to make technical changes.
UK830509/200114 © Alpha-InnoTec GmbH
EC declaration of conformity
To Next Page
Loading...
Need help?
General
