EasyManuals Logo

Alpha-InnoTec SWP Series User Manual

Alpha-InnoTec SWP Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
We reserve the right to make technical changes.
UK830509/200114 © Alpha-InnoTec GmbH
What to do rst:
Check the supplied product for signs of external
damage during delivery
Check that nothing is missing from the scope of sup-
ply
Immediately submit a complaint in the event of de-
livery defects.
NOTE.
Note device type.
Overview "Technical Data/Scope of Supply" or
rating plate on the device.
Set-up and Installation
For all work to be carried out:
NOTE.
Observe the locally-applicable accident
prevention regulations, statutory provi-
sions, ordinances and directives.
WARNING!
Only qualied technicians may set up and
install the heat pump and heat pump sys-
tem!
NOTE.
Observe the noise data of the relevant de-
vice type.
Overview "Technical Data/Scope of Supply", sec-
tion "Sound".
installation Room
CAUTION.
Only install the device inside buildings.
The installation site must be frost-free and dry. It must
satisfy the specications of DIN EN 378. It must also sat-
isfy the applicable local regulations.
Overview Dimensional drawings” and Clear-
ance dimensions” for the respective size.
tRanspoRt to the installation site
Always comply with the following safety information
during transport:
CAUTION!
Wear protective gloves.
DANGER!
Work with several persons during trans-
port. Remember the weight of the device.
Overview "Technical Data/Scope of Supply", sec-
tion "General Device Data".
DANGER!
The unit can tip when being removed from
the wooden pallet and during transport.
This can result in personal injury and dam-
age to the unit.
Take suitable precautionary measures
to eliminate the danger of tipping.
DANGER!
Always secure the device against sliding
during transport.
CAUTION.
Never use the components and hydraulic
connections on the device for transporta-
tion purposes.
CAUTION.
Never damage the hydraulic connections
on the device.
CAUTION.
Do not tilt the device more than 4 maxi-
mum (applies for every direction).
To avoid damage during transport, you should transport
the unit to the nal installation location in its original
packaging (with packaging on the wooden pallet), using
a lifting truck.

Table of Contents

Other manuals for Alpha-InnoTec SWP Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpha-InnoTec SWP Series and is the answer not in the manual?

Alpha-InnoTec SWP Series Specifications

General IconGeneral
BrandAlpha-InnoTec
ModelSWP Series
CategoryHeat Pump
LanguageEnglish

Related product manuals