Alpha Omega Instruments 800 Series User Manual

Main Menu Defaults
Operation
Control Introduction
Control Methods
Block Diagram
On/Off Control
Proportional Only (P) Control
Proportional + Integral (PI) Control
Proportional + Integral + Derivative (PID) Control
Ramp to Set Point
Detailed Parameter Descriptions
Section 5.0
OPERATION AND CONTROL OF THE SERIES 800/850 TEMPERATURE
CONTROLLER.
If all the previous steps have been followed, at this stage, the Series 800/850
temperature controller should be properly configured for the desired sensor type and
the TEC module should be connected in the correct fashion.
The following pages will explain the user interface and the parameters that come
pre-configured to use in what is called the Main Menu.
1
Items covered in this section:
ALPHA OMEGA INSTRUMENTS CORP. Instruction Manual
Series 800/850 Thermoelectric Cooler Controller Page 43
1
Please note: There are many possible variables to manipulate, however, most are not necessary during normal operation of the
Series 800/850 temperature controller. See Appendix F, Main Menu for more details.

Alpha Omega Instruments 800 Series Specifications

General

Brand	Alpha Omega Instruments
Model	800 Series
Category	Controller
Language	English