V
vsmithAug 4, 2025
What to do if [Err1], [Err2], [Err3], or [Err4] shows on the Alpha Omega Instruments 800 Controller display?
- MMonica BrownAug 4, 2025
If the Alpha Omega Instruments Controller displays [Err1], [Err2], [Err3], or [Err4], it indicates a problem with the temperature sensor input. To resolve this, check the sensor wiring for reversed wires, open circuits, or shorted circuits. Also, verify the sensor programming and configuration as detailed in Step 1 of the Manual for your specific temperature sensor. Ensure that the ambient temperature is within the acceptable range and that the calibration offset parameter is appropriately set.