C HANGING NEO SETTINGS
Restoring Default Settings
58 AlphaSmart Manager 2 User Manual
. . . . .
4. A dialog box will ask you to choose whether to restore the default settings
for just the selected SmartApplet or for all SmartApplets (including the
System settings). Click one of the options; then, click OK.
If you chose to restore default settings for just one SmartApplet, that
SmartApplet and all settings will be checked. If you chose to restore
default settings for all SmartApplets, all of them will be checked, including
the System settings. All settings will be changed to the default settings.
5. Click the Send List tab and verify that the settings you want to transfer
appear in the list.
6. Click Send. If you have set a send list password (see page 63), you must
enter the password and click OK.
Table of Default Settings
The following table lists the default settings for the NEO system and
SmartApplets.
Setting Name Default
System settings
Startup SmartApplet AlphaWord Plus
Auto Repeat On
Sticky Keys Off
Keyboard Layout QWERTY
Idle Time 4 minutes
Slow Keys Off
Slow Key Delay 0 seconds
Reset System Font to Default Off
Transfer Speed Fast
IR Transfer Speed Fastest
Master Password ***** (Set your own)
Printer Selection HP Printer
Two-button ON Off
AlphaWord Plus settings
Disable this SmartApplet No
Passwords Enabled Off
To Next Page
Loading...
