AUTOMATIC TIMER SWITCH
The AlphaVision NG control panel is supplied with a timer switch (RTC = Real Time Clock) for automatic
arming and disarming of the system. The user can program up to 4 different timer switches. Each timer
switch can be programmed to arm and disarm twice a day and is valid for one or more sections. For
example, the user can program one timer switch to disarm and arm section A, and program the second timer
switch to disarm and arm section B. It is also possible to program one timer switch to disarm and arm
section A and B.
Hint: when a printer module is available, the timer switch settings (arm/disarm schedule and holidays) can
be printed by executing function 12.
AlphaVision NG installation manual Rev. 2.0 27-08-2003 Blz. 77/101
To Next Page
Loading...