Timer switch flow chart
For each timer switch, the disarm- and arm times can be programmed separately for each day. For each day,
two disarm and arm times can be programmed. The two different times are marked as T1 (first disarm and
arm times) and T2 (second disarm and arm times). This makes it possible to disarm and arm the system
twice a day.
The timer switches can be programmed as desired, but to avoid problems some precaution is required.
AlphaVision NG installation manual Rev. 2.0 27-08-2003 Blz. 78/101
To Next Page
Loading...