Alpine Spas MUNRO - Power Save Mode [P.SAV]

28
6. SPA POOL USAGE GUIDE & TIPS
NOTE: IfP.SAVfunctionistobeusedthespauserMUSTconsideranysleep
timers[SNZE]andadjustthemaccordingly.SleeptimersettingswillOVERRIDE
anyP.SAVsettings.RunningP.SAVfunctionwhilesleeptimerissetwilllikely
resultincoldwatertemperaturesduetoinsufcientheattimeavailable.
Power Save [P.SAV]
Powerutilitiesinsomeregionsofferhouseholdpowermetersthatcantrackpower
usageduringdifferenttimesoftheday.Thisallowstheutilitiestooffergreatly
reducedpowerpricingduringoffpeakpowertimes.
ThePowerSave(P.SAV)functionallowstheusertoprograminthepeak
powerperiodsothespacontrolknowsnottoperformltrationand/orheating
duringthoseexpensivehours.Insteadthecontrollerwilltakeadvantageofthe
competitivelypricedoffpeakhours,andruntheltrationand/orheatingduringthe
offpeakhours.
Setting & Adjusting Power Save [P.SAV]
Thepowersavesettingconsistsofachoiceofmode,peakpowerperiodstarttime
andpeakpowerperiodendtime(refertablebelow).
Item Description Notes
P.SAV PowerSaveMode
Functionsdisabledduring
peakpowerperiods
OFF=P.SAVdisabled(default)
LOW=Filtrationdisabled
HIGH=Filtration&Heatingdisabled
BGN Begin Time
Peakpowerperiodbegins
Adjustable:00:00-23:59
Default=14:00(2PM)
END EndTime
Peakpowerperiodends
Adjustable:00:00-23:59
Default=20:00(8PM)
Reminder that the hours you are programming into the system with the P.SAV feature is
for when the heating and/or ltration will NOT occur.
Press and hold the
‘UP/DOWN’ buttons
together. The word
[MODE] will display.
Conrm choice with
the 'OK' button.
Enter [P.SAV] by
pressing the ‘OK’
button.
Scroll to nd
[P.SAV] by using
the ‘UP or DOWN’
buttons.
Set the time using
the 'UP', 'DOWN' &
'OK' buttons.
Set the time using
the 'UP', 'DOWN' &
'OK' buttons.
Scroll between
the options and
choose [LOW] or
[HIGH] (see table).
Enter the [LOW]
or [HIGH] setting
with the 'OK'
button.
[BGN] will display briey then ick
off and display a time setting. You
are now setting the time you wish to
start the [P.SAV] feature.
[END] will display briey then ick off
and display a time setting. You are
now setting the time you wish to end
the [P.SAV] feature.
After setting the end time, the
display will ick back to home screen
and will be all setup.