Presetting
Stations
Manually
Frequency
Search
Function
1 Select the radio band and tune
in
a desired radio
station you wish to store
in
the preset memory.
2 Press and hold, for at least 2 seconds,
anyone
of the
preset
buttons
(1
through
6)
into which
you
wish
to store the station.
The selected station is stored.
The display shows the band, preset
number
and
station
frequency memorized.
• A total
of
18 stations can be stored
in
the preset memory (6 stations
for
each band:
FM
I,
FM2 and AM).
•
If
you store a stll/ion
in
a preset memory which already has a sllltion.
the currelll station will be cleared
and
replaced with the new station.
You
can
search for a radio station by its frequency.
1 Press and hold
C\
lENT
for at least 2 seconds
in
Radio mode to activate Frequency search mode.
2 Turn the
Rotary
encoder
to select the desired
frequency.
3
*
Press
C\
lENT
to receive the selected frequency.
* Operation is not required during HD Radio reception.
• Press
and
hold
~IESC
for
at least 2 seconds
in
the search mode to
cancel.
Or,
the search mode will be canceled
ifno
operation is
performed
for
10 seconds.
Tuning
to
Preset
Stations
Presetting
Stations
Automatically
•
If
/10
sllltions are stored. the Wner will re/llm to the original station
you were listening to before the aI/to memory procedure began.
SPS:
Sub-program Service
Program Service
MPS:
Main Program Service
SPS:
Sub-program Service
SPS:
Sub-program Service
Program Service example:
Multicast Radio Station Program
No.
87.7 MHz
NO.1
87.7 MHz
NO.2
877
MHz
NO.3
I
I
I
I
87.7
MHz
NO.8
When multicast station is received, the program number
and the SPS indicator lights up. Press
....
or
~
to select
the desired program service.
Receiving the Multicast Station Program Service.
SPS Indicator
Multicasting is the Ability to broadcast multiple
program
streams
over
a
single
FM
frequency.
This
increases the
amount
and
diversity
of
content
choices.
A
maximum
of
eight
multicast station
channels
can
be selected
on
this unit.
Receiving
a
Multicast
Station
(HD
Radio
mode
only)
Press
BAND
repeatedly until the desired band is
displayed.
Press
anyone
of the station
preset
buttons
(1
through
6)
that has your desired radio station
in
memory.
The
display
shows the band, preset number and frequency
of the station selected.
2
1
1 Press
BAND
repeatedly until the desired radio band
is displayed.
2 Press and hold
TUNE/A.ME
for at least 2 seconds.
The tuner will automatically seek
and
store 6 strong stations
in the selected band. They will be stored into preset buttons
1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored
in
preset location
NO.1.
9-EN
To Next Page
Loading...
Need help?
General
