Blackout
Mode
On
and
Off
When Blackout mode
is
turned on, all display indications on this unit
will tum
off
to reduce power consumption. This additional power
enhances the sound quality.
1 Press
SOUND
SETUP
to activate the Sound Setting
mode.
2 Turn the
Rotary
encoder
to select the Black Out
Adjustment mode, and then press
~
lENT.
SUBW
Level*JI H Bass*/2 H Treble*/2 H HPF*/2
H Black Out H
SUBW
Level
3
Turn
the
Rotary
encoder
to select the Black Out ON.
OFF (Initial setting) H ON
4 Press and hold
~
lESe
for at least 2 seconds to
cancel the Sound Setting mode, then after 5 seconds
the Blackout Mode
is
activated.
• When Black
Our
is set to ON. ajier 5 seconds. all display on the unit
will turn
oj]:
•
If
any button on the unit is pressed during the blackout mode. the
function will be displayed for
5 seconds to show the operation
b~tore
returning to Blackout mode.
To
cancel Blackout mode. select OFF
in
step 3.
*"
Whenlhe subwoofer mode is set 10
OFF.
its level cannot be
adjusted.
R~ter
to "Turning Subwoojer ON/OFF" (page
16).
*/2
The}illlction is inoperable when DEFEAT is set to
ON.
Turning
Loudness
On/Off
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold
Rotary
encoder
(LOUD)
for at least 2
seconds to activate or deactivate the loudness mode.
"LOUD"
indicator
lights.
• When
{III
external audio processor is connecled. Ihis setting cannor
be made.
•
The
function
is
inoperable when DEFEAT is
sello
ON.
16-EN
Turning
Subwooler
ON/OFF
When the subwoofer
is
on, you can adjust the subwoofer output level
(refer
to
page
14).
1 Press and hold
SOUND
SETUP
for
at
least 2
seconds to activate the Subwoofer selection mode.
2 Turn the
Rotary
encoder
to select the Subwoofer
mode, and then press
~
lENT.
Subwoofer H
SUBW
System
3 Turn the
Rotary
encoder
to select Subwoofer
ONI
OFF,
and then press
~
lENT.
OFF H ON (Initial setting)
4 Press and hold
~/ESe
for at least 2 seconds to
return to normal mode.
• I{no operation is
perjonnedjor
15
seconds. the unit will return to
normal mode aUlomatically.
Setting
the
Subwooler
System
When the subwoofer is un, you can select either SystemI or System2
for the desired subwoofer effect.
1 Press and hold
SOUND
SETUP
for at least 2
seconds to activate the Subwoofer selection mode.
2 Turn the
Rotary
encoder
to select the SUBW.
System mode, and then press
~
lENT.
Subwoofer H
SUBW
System
3 Turn the
Rotary
encoder
to select Subwoofer
System, and then press
~
lENT.
Select
either
System
1
or
System
2 for
the
desired
subwoofer
effect.
1 (Initial setting)
H 2
System
1:
Subwoofer level changes according the main
volume setting.
System
2:
Subwoofer level
change
is
different from the main
volume setting. For example. even at low volume
settings. the subwoofer
is
still audible.
4 Press and hold
~/ESe
for at least 2 seconds to
return to normal mode.
•
Ifno
operation is
perjonnedfor
15
secol/{Is. the unit will retllrll
to
normallllode automatically.
• This.!unction is inoperable when Subwoo.!er is set
to
OFF.
To Next Page
Loading...
Need help?
General
