Setting
the
Auxiliary
Data
Field
Display
(XM
only)
The
XM Auxiliary Data Field (ADF) display can be switched on
or
off.
There
is
no
ADF
function for the SIRIUS receiver.
1 Press and hold
F/SETUP
for at least 2 seconds to
activate the SETUP selection mode.
2 Turn the
Rotary
encoder
to select the
XM
mode,
and then press
~IENT.
Bluetooth*1 H General H Display H XM'"'/SIRIUS;J H
HD
Radio".l H Bluetooth
*1
Displayed only
whenlNT
MLlte
is
OFF
and
the mode is set
10
other
rhan
Billetooth
ALldio.
*2 Only when XM Radio is connected.
*3 Only "'hen SIRIUS Radio is connected.
".I Ollly when HD Radio is conllected.
3 Press
~/ENT
to activate the
XM
ADF mode.
4 Turn the
Rotary
encoder
to select
XM
ADF ONI
OFF, and then press
Q./ENT.
When setting to ON, Auxiliary Data Field is displayed
by
pressing VIEW (refer to the "Changing the Display" section
on
page
25.).
5 Press and hold
F/SETUP
for at least 2 seconds to
return to normal mode.
• Pressillg
~/ESC
retLlms to the previoLls SETUP mode.
• rrno operation is
performedfor
60
seconds, SETUP
is
canceled.
26-EN
i
J:
.
..
Controlling
USB
memory
(Optional)
A USB memory device may be connected to this unit. With a USB
memory device connected to this unit, the audio tiles will be playable
from this unit.
• The controls on this unit
for
USB memory operation are operati,'e
only when a USB memory is connected.
Playing
MP3/WMA/AAC
Files
with
the
USB
memory
(Optional)
If
you connect a USB memory device containing
MP3/WMN
AAC,
these tiles are playable on this unit.
1 Press SOURCE/<!> to switch to the USB mode.
TUNER
~
XM/SIRIUS*I
~
DISC
~
USB
~
iPod*2/AUX+*.1
~
Bluetooth Audio*4
~
CHANGER*5
~
TUNER
*1
Only when XM Radio or SIRIUS Radio is connected.
*2 Displayed only when the iPod is connected alld
AUX
+ Sell/p is set 10
OFF.
refer to "Setting the AUX+ Sell/p
Mode"
(page 20).
*3 Displayed ollly when the
AUX
+
SetLlp
is set
10
ON.
refer to "Selling
the AUX+
SetLlp
Mode"
(page 20).
".I
Displayed only whell
BILlelOoth
IN is set
10
ADAPTER, refer to
"BILle/ooth Setting" (page
19).
*5
Only whell the CD changer is conllected
2
To
pause playback, press
~/II.
Pressing
~
/II
again will resume the playback.
• The root folder is displayed as "ROOT"
in
the Folder Name Search
mode.
• This unit plays backfill'S
ill the USB memory with the same controls
and modes as playback
or
CDs containing MP3IWMNAAC.
For
details, referto
"CDIMP3IWMNAAC"
on pages 10 to
13.
• Before disconnecting USB memory. be sure 10 change to allo/her
source
or
set to pause.
• The playback time may not be correctly displaved when a VBR
(Variable Bit Rate) recorded/ile is played back.
To Next Page
Loading...
Need help?
General
