SOURCEI<!>
1BAND
.'11
O~i;/~r
-
""
__
"_!!-C:~,
C
-1
f:J\
!\~
i',;:
/
II
_J
I-
.-
'-;"
//
-
-"
/;'T~c:pe==p
;'
"- ?
~_::
F/SETUP Select buttons
(1
through 6)
Controlling
CD
Changer
(Optional)
An
optional6-disc
or
12-disc
CD
Changer
may be connected to this unit
if
it
is
Ai-NET compatible, With a
CD
Changer connected to the
Ai-NET input
of
this unit, the
CD
Changer
will be controllable from
this unit.
Using the
KCA-400c
(Multi-Changer Switching device)
or
the
KCA-4\
OC
(Versatile Link Terminal) multiple changers can be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 36 for selecting the
CD
Changers,
• The controls on this
unitfor
CD Changer operation are operative
only when a CD Changer is connected,
•
The
DVD changer (optional) is controllable from this unit as well as
the CD changer.
1 Press SOURCE/<!>
to
activate the CHANGER mode.
•
The
source indicator I'aries depending on the connected source,
• Press
BAND
to switch the Disc mode
in
the Changer mode,
2 Press
F/SETUP
to
activate Disc Select mode.
Disc Select Mode
Disc Select
Mode"
~ ~
(Disc
No,1-6)
(Disc
No7-12)
Disc Select Mode
RPT/M,IX
Mode
~
(Disc
No,1-6)
3 Press
the
disc
select
buttons
(1
through
6)
corresponding
to
one
of
the
discs
loaded in the CD
Changer.
The selected disc number appears
in
the display and
CD/MP3 playback starts,
• Alter selecting the desired disc, you can operate
in
the same way as
jor
the CD player
of
this unit,
For
details, please see the CDIMP31
WMAlAAC section,
* When a 12-disc
CD
changer is connected,
36-EN
Playing
MP3
Files
with
the
CD
Changer
(Optional)
If
you connect a changer compatible with MP3, you can
play,
CD-ROMs, CD-Rs, and
CD-RWs
containing MP3 files
on
this unit.
1 Press SOURCE/<!>
to
switch
to
the
MP3 Changer
mode.
2 Press
anyone
of
the
disc
select
buttons
(1
through
6)
corresponding
to
one
of
the
discs
loaded in
the
CD Changer.
3 To pause playback, press
~/II.
Pressing
~/II
again will resume playback,
• The unit can play discs containing both audio data and MP3 data,
•
For
operating
MP
3 with an MP3 compatible
CD
Changer. refer to
"CDIMP3IWMAlAAC" pages
10
to
13,
Multi-Changer
Selection
(Optional)
Alpine's Ai-NET system will support up to 6
CD
Changers,
When
operating two
or
more changers. the
KCA-400c
(Multi-Changer
Switching device) must
be used,
If
you use I Switching device. you can
connect up to 4
CD
Changers, If you use 2 Switching devices, you can
connect up to 6
CD
Changers, When using KCA-41
OC
(Versati
Ie
Link
Terminal), you can connect two changers and two external outputs
(AU
X),
1 Press SOURCE/<!> on
this
unit
to
activate the CD
Changer mode.
Alternatively, press SOURCE on the remote control
(RUE-4202)
to
activate the CD Changer mode,
SOURCE
----tr-+----,
'-':=-+11--
BAND
2 Press
BAND
on
this
unit
or
the RUE-4202
to
activate
the
CD Changer Selection mode.
The
CD Changer Selection mode remains active for a few
seconds,
3 Press
BAND
until
the desired CD Changer
indicator
appears
on
the display.
Alternatively press BAND
on
the Remote Control until the
desired changer indicator appears
on
the display,
•
If
the selected CD Changer is not connected, the display will show
"NO CHANGER (No,)",
•
To
operate the selected changer. see "CDIMP3IWMAlAAC"
(pages
10
to
13),
•
For/imher
details "bout the extel11al input (AUX) when
u~'illK
KCA-410C, see "Selling the AUX Mode (V-Link)" 011 page
20,
To Next Page
Loading...
Need help?
General
