Alpine CDA-9886M - Indication for USB memory; Indication for iPod Mode; Error; Device Error

1------------1
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There
is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
Error
• If an error or other problem occurs.
- Change channels
or consult your Alpine dealer.
Indication for IPod Mod~·
NoiPod
• The iPod is not connected.
- Make sure the iPod
is correctly connected (refer to
"Connections"
).
Make sure the cable is not bent excessively.
NO SONG
• There are no songs in the iPod.
- Download songs to the iPod and connect to this unit.
Error 01
• Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and this
unit, using the iPod cable.
Error 02
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
Indication for USB memory
IError I
• Abnormal current is run to the USB connector device (an error
message may be displayed
if the USB device that is not
compatible with the unit
is connected).
USB memory
is a malfunction or it is shorted.
- Connect another USB memory.
IDevice Error I
• A USB device that is not supported by the unit is connected.
- Connect a USB device that
is supported by the unit.
No USB Unit
• A USB memory is not connected.
- Make sure the USB memory device
is correctly connected and
the cable
is not excessively bent.
NO FILE
• No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
IUNSUPPORTED I
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that
is supported by the unit.
PROTECT
• A copy-protected WMA tile was played back.
-
You can only play back non-copy-protected files.
41-EN