Removal
1.
Remove the detachable front panel.
2.
Insert the bracket keys into the unit, along the guides
on
either side. The unit can now be removed from the
mounting sleeve.
This unit
~.'
.
~
Bracket keys
~
~
(Included)
~
3 Pull the unit out, keeping
it
unlocked as you do
so.
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory
to
USB
cable.
This unit USB memory
1 USB connector (sold separately)
~rdiW~-~-nrcS
Cable (sold separately)
Remove USB memory
Pull
out USB memory squarely from the
USB
cable.
This unit USB memory
..
L.
USB connector (sold separately)
ff:!O."
)}~JJ
...
' LlEi!
~
1Ei!:_
U···
.!..
~:r._.-::--~
Cable (sold separately)
• When removing USB memory. pull it
out
straight.
• I{sound is not output
or
USB memory is not recognized even when
USB memory is connected. remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode. then remove
the USB memory.
lIthe
USB memory is removed
in
the USB memory
mode. data may be damaged.
• Route the USB cable awayfrom another cahles, etc.
45-EN
To Next Page
Loading...
