16-EN
Bit rate
This is the “sound” compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher
the sampling rate, the higher the sound quality, but also the larger the
volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into the
specified audio compression format.
Ta g
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA files.
Root folder
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically
for all burned discs.
CDE-W265BT
CDE-164BT
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
1
Press YSETUP repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER
*1/*2
BASS LEVEL
*2/*3
TRE LEVEL
*2/*3
BALANCE
FAD E R
*4
DEFEAT VOLUME SUBWOOFER
*1 When the subwoofer mode is set to OFF, its level cannot be
adjusted, refer to “Turning Subwoofer ON/OFF” on page 18.
*2 Not displayed when BASS ENGINE SQ mode is selected. Refer
to “Switching BASS ENGINE SQ mode” on page 20.
*3 Adjustable only when DEFEAT is OFF.
*4 Not displayed when 2WAY/3WAY system mode is set to 3WAY.
Refer to “Switching the 2WAY/3WAY system mode” on page 23.
Terminology
Sound Setting
Subwoofer +0 ~ +15
Bass level −7 ~ +7
Treble level −7 ~ +7
Balance L15 ~ R15
Fader R15 ~ F15
Defeat ON/OFF
Volume 0 ~ 35
To Next Page
Loading...
Need help?
General
Weight and Dimensions
