Alpine CDE-W265BT User Manual

36-EN
During a call, this function allows you to initiate the transfer of the
audio between the Smartphone and the speakers in the car.
During a call, press OBAND or press and hold  for
at least 2 seconds to switch the call sound between the
unit and Smartphone.
Note
• Depending on the Smartphone, this operation may not be possible.
Bluetooth Audio Operation
With a Bluetooth compatible Smartphone or music player, it’s possible to
play and control music playback wirelessly
*
.
* To play back audio, a Smartphone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
Notes
• Set BT IN to ON when you want to use Bluetooth Audio function. Refer
to “Setting the Bluetooth Connection (BT IN)” on page 31.
• During a call, sound on the Bluetooth audio source is muted.
• If you operate the Hands-free phone (e.g. searching in the phone book)
while using the Bluetooth Audio function, Bluetooth Audio playback
may be affected.
Press V/SOURCE to select the BT AUDIO mode.
Press  or  to select the desired Song.
Pressing and holding  or  will fast backward/fast
forward track continuously.
Note
• The action depends on the paired device.
Press .
A playback stops. Pressing again will resume a playback.
Press  or  to select the desired Group.
Note
• This function is not available on all paired devices.
Artist name, album name, etc., may be searched and displayed during
playback or pause.
1 Press ENTER to activate the search mode.
2 Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3 Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4 Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the paired device.
• The pause mode may be canceled after the search.
• This function may not available depending on the paired device.
Call Switching Operation
Recalling the Bluetooth Audio Mode
Selecting the desired Song
Pausing
Selecting the desired Group
Searching for a desired song

Alpine CDE-W265BT Specifications

General

MP3 playback	Yes
Operating temperature (T-T)	-10 - 60 °C
Bluetooth version	2.1+EDR
Bluetooth profiles	A2DP, AVRCP, HFP, OPP, PBAP, SPP
DIN size	2 DIN
Output power	200 W
Product color	Black
Disc types supported	CD, CD-DA, CD-R, CD-RW
Equalizer bands quantity	9
Signal-to-Noise Ratio (SNR)	105 dB
AM band range	530 - 1710 kHz
FM band range	87.7 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	18
Card reader integrated	No

Weight and Dimensions

Weight	1850 g
Dimensions (WxDxH)	178 x 161.7 x 100 mm