To Next PageTo Next Page
Need help?Do you have a question about the Alpine CVA-1004R and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| CD Player | Yes |
| CD-R/RW Playback | Yes |
| Remote Control | Yes |
| Built-in Amplifier | Yes |
| Equalizer | Yes |
| Subwoofer Output | Yes |
| Preamp Outputs | 3 pairs |
| Bluetooth | No |
| USB Port | No |
| Auxiliary Input | Yes |
| Tuner | AM/FM |
Important safety instructions that, if ignored, can lead to serious injury or death.
Important instructions that, if ignored, can lead to injury or property damage.
General precautions for safe operation and maintenance of the unit.
Step-by-step instructions for correctly attaching the detachable front panel to the main unit.
Procedure for safely removing the detachable front panel from the main unit.
Steps to initialize the unit after installation or initial power connection.
Instructions for powering the unit on and off safely, including precautions for vehicle movement.
How to raise the monitor using the unit or remote control, including obstacle detection.
How to lower the monitor using the unit or remote control, including obstacle detection.
How to adjust and set the preferred opening angle for the monitor.
Detailed steps to adjust the monitor's angle for optimal visibility.
How to adjust audio settings like volume, balance, and fader using the rotary encoder.
How to temporarily lower the audio volume by 20 dB using the MUTE/SETUP button.
How to automatically scan and tune to available radio stations using seek functions.
Steps to manually store desired radio stations into preset memory buttons.
How the unit automatically scans and stores up to 6 strong stations for each band.
How to select and play radio stations that have been stored in the preset memory.
How to display and select stations from a titled list, if available.
How to enable RDS and receive station information like names and traffic data.
How to recall RDS stations stored in presets, with automatic retuning to stronger signals.
How to set the unit to receive regional RDS broadcasts or all regions.
How to enable PI SEEK to search for stations based on Programme Identification.
How to activate and receive traffic announcements, including TP indicator function.
How to search for radio stations based on their Programme Type (e.g., News, Rock, Classics).
How traffic announcements interrupt playback from other sources like CD or Radio.
How to prioritize listening to a specific Programme Type, interrupting current playback.
How to display text messages broadcast by radio stations.
How to perform ensemble seek tuning for DAB broadcasts for better reception.
How to select different services within a DAB ensemble.
How to switch between primary and secondary audio service components.
How to memorize specific DAB services using preset buttons.
How to recall memorized DAB services.
How to select different services within a DAB ensemble.
How to switch between primary and secondary audio service components.
How to memorize specific DAB services using preset buttons.
How to recall memorized DAB services.
How to automatically search and memorize DAB ensembles.
How to search for DAB stations by Programme Type.
How to enable or disable automatic reception of traffic news announcements.
How to select specific types of announcements to interrupt playback.
How to customize information displayed for DAB stations.
How to enable or disable regional announcement interruptions.
How to automatically switch to RDS when DAB reception is poor.
How to adjust dynamic range control for a more comfortable listening experience.
How to play audio from connected CD players or changers.
How to set the player to repeat the current track, folder, or entire disc.
How to play tracks from a disc in a random sequence.
How to scan through the first 10 seconds of each track.
How to select specific folders on an MP3 disc.
How to search for and play specific MP3 files or folders.
How to operate a connected CD changer, including disc selection.
How to play MP3 files from CD-ROMs, CD-Rs, and CD-RWs using a changer.
How to select between multiple connected CD changers.
How to set MP3 playback to cover entire disc contents or only selected folders.
How to play DVD, Video CD, or CD discs with a connected player.
How to freeze frame or pause playback.
How to navigate between chapters or tracks.
How to fast forward or rewind playback.
How to set repeat play for chapters, titles, tracks, or discs.
How to control a connected DVD changer, including disc selection.
How to activate the navigation system and display its screen.
How to mix navigation voice guidance with other audio sources.
How navigation voice guidance is output through rear/subwoofer connectors.
How to turn the telephone mode on and off for hands-free calling.
How to receive incoming calls via the hands-free system.
How to initiate calls using speed dial, phone book, or call history.
How to receive and display short messages.
How to set incoming calls to be answered automatically or manually.
How to make calls using contacts stored in the phone's address book.
How to make calls using speed dial entries.
How to redial numbers from the outgoing call history.
How to redial numbers from the incoming call history.
How to redial numbers from the missed call history.
How to display disc or station titles and text information.
How to input custom titles for discs or radio stations.
How to delete previously entered titles.
How to adjust bass frequency emphasis and level.
How to adjust treble frequency emphasis and level.
How to adjust the phase of the subwoofer output.
How to apply loudness compensation for low listening levels.
How to bypass processor circuits for direct audio signal output.
How to adjust the monitor's backlighting and dimming behavior.
How to adjust the brightness level of the video display.
How to adjust the color saturation of the video display.
How to adjust the tint (green/magenta balance) of the video display.
How to set different background screen colors for day and night modes.
How to enable automatic background color changes with ignition status.
How to set text scrolling behavior for titles and CD text.
How to configure the monitor to open/close automatically or manually.
How to enable or disable audible feedback for button presses.
How to turn the clock display on or off on the monitor.
How to view the clock time on the sub-display when the monitor is closed.
How to set the current time on the unit.
How to automatically adjust the clock time using RDS data.
How to configure settings related to the optional KCE-104V expansion box.
How to select the video/audio source for the rear-seat monitor.
How to enable preout connections via the KCE-104V expansion box.
How to enable and view the spectrum analyzer display.
How to select different tuner modes (NORMAL, HI-FI, STABLE) for optimal reception.
How to adjust FM signal levels to match other audio sources.
How to turn the subwoofer output on or off.
How to enable/disable audio muting for auxiliary source interruptions.
How to adjust radio frequency steps for different regions.
How to switch between different disc types (CD, DVD) when using changers.
How to control connected external audio processors.
How to watch video from one source while listening to another.
How to change the picture aspect ratio for the monitor.
How to operate the unit with the monitor closed.
Troubleshooting guide for common problems and their solutions.
Troubleshooting tips for radio reception and broadcast issues.
Explanation of CD changer status indicators like HI-TEMP and ERROR codes.
Technical specifications of the unit's various sections.
Important warnings and guidelines for making proper electrical connections.
Critical requirement for vehicle compatibility: 12 Volt negative ground.
Essential safety step: disconnect the negative battery terminal before wiring.
Warning against improper wiring practices to avoid fire or shock.
Precautions to avoid damaging vehicle components when drilling holes.
Warning against using safety-critical parts for grounding.
Safety warning regarding small parts like bolts and screws.
Guidance on choosing a safe installation location that does not hinder vehicle operation.
Recommendation to use professional installers for safety and proper function.
Importance of using correct parts and ensuring secure installation.
Instructions for safe cable routing to prevent crimping or pinching.
Warning against installing in environments prone to moisture or dust.
General precautions during installation, including battery disconnection and wiring.
Reminder to record serial number and installation details.
Detailed steps for installing the monitor unit into the dashboard.
Instructions for connecting the parking brake lead.
Wiring diagram for using an optional SPST switch for ACC power.
Diagram illustrating the basic wiring connections of the unit.
Connection point for the antenna.
Connection point for the antenna.
Connection for audio interruption signals from external devices.
Connection for amplifier or signal processor remote turn-on signal.
Connection for parking brake status signal.
Connection for dimming the display with vehicle lights.
Connection for the unit's power supply via ignition.
Connection for grounding the unit to the vehicle chassis.
Connection for controlling the vehicle's power antenna.
Connection for the main power supply from the battery.
Location of the fuse.
Standard connector for power.
Connector for remote control signals.
Lead for sending control signals to the remote control.
Input for RGB video signals.
Cable for Ai-NET compatible devices.
Connector for power supply.
Speaker output connections for the left rear speakers.
Speaker output connections for the left front speakers.
Speaker output connections for the right front speakers.
Speaker output connections for the right rear speakers.
Standard connector for speaker output.
Switch for selecting EQ/DIV or NORM mode.
Diagram illustrating a system setup with amplifier, navigation, DVD player, and CD changer.
Wiring diagram for connecting the NVE-N055PS navigation system.
Wiring diagram for connecting the NVE-N055PV navigation system.
Diagram showing system setup with KCE-104V, CD changer, DVD player, navigation, and monitors.
Detailed pinout and connection descriptions for the KCE-104V expansion box.
Troubleshooting guide for common problems and their solutions.
Troubleshooting tips for radio reception and broadcast issues.
Explanation of CD changer status indicators like HI-TEMP and ERROR codes.
Technical specifications of the unit's various sections.
