10-EN
• The software can only be used under the Microsoft® Windows® operating system.
Operating system: Windows 10, Windows 11
CPU: 2.9GHz or higher
Memory card: 1GB or higher
Hard Disk: 512MB or more free space
Computer screen resolution: 2560 × 1440 or higher
• Before connecting the PXE-C80-88 machine to the computer, please install the PXE-C80_C60 computer
software correctly.
• After installing the PXE-C80_C60 software, you can tune and set the PXE-C80-88 machine on the computer.
* This function is mainly for manufacturers and distributors.
Computer Software Introduction
1 The host is powered on.
2 Connect one end of the USB cable to the
“USB” port of the host, and connect the
other end to the USB port of the computer.
3 Double-click the PXE-C80_C60 software icon
to open the software.
Online switch.
Load or save the tuning file.
Select the function setting.
Encryption and decryption of tuning data.
Adjust the total volume.
Display the model name.
Function page selection.
Editing area of function page.
Computer Software
Precautions installation
To Next Page
Loading...
Need help?
General
