Alpine PXE-C80-88 User Manual

16-EN
Refer to “Output type custom page” (page 14).
Setting items:
Channel mute
Setting content:
Mute/off
The output has 31 bands of EQ adjustable, and there
are two interfaces of graphic equalization and
parametric equalization.
EQ Gain step
Setting items:
EQ Gain step
Setting content:
0.1 (initial setting)/0.5/1
EQ curve display
Click the channel display selection button to display
the curve of the channel.
EQ settings
1 Select the output channel to be adjusted.
2 When the mouse moves to the serial number
position, hold down, drag up and down to
adjust the equalizer gain, drag left and right
to adjust the equalizer frequency; when the
mouse moves to the left and right blue
boxes, hold down and drag to adjust the
equalizer Q value. You can also set the
frequency, Q value and gain by directly
inputting the value, scrolling the mouse
wheel, and the up and down keys on the
keyboard.
Adjustable frequency range: 20Hz~20kHz;
Adjustable range of Q value: 0.404~28.852;
Gain adjustable range: -12.0 dB ~+12.0 dB.
Note:
The gain is adjustable in the graphic equalization
interface, and the frequency and Q value are not
adjustable. In the parameter equalization interface,
the frequency, Q value and gain are adjustable.
1 When there is EQ adjustment, the direct
equalization button appears.
2 Through Equalization: When the current
channel equalizer is turned on, this button
will be displayed [ ], click [Through
Equalization ] or the through dot to make all
equalizers of the current channel inactive
(through).
3 After clicking the “Yes” button, the button
will be restored to the [Restore Balance ]
state [ ]. Then click [Restore EQ]
and all equalizers of the current channel will
return to the last activated state.
Customize the output channel
type
Channel Mute Setting
EQ Adjustment
P. E G pag e
G.EQ page
Equalizer Settings

Alpine PXE-C80-88 Specifications

General

Brand	Alpine
Model	PXE-C80-88
Category	Amplifier
Language	English