17-EN
4 Click [Reset EQ], the parameters of all
equalizers of the current channel return to
the initial state.
5 Click [G.EQ Mode] to pop up a warning box
“Confirm P.EQ to G.EQ mode?”, press OK to
switch to [G.EQ Mode], click [P.EQ Mode] to
pop up a warning box “Confirm G.EQ to P.EQ
mode?”, press OK to confirm Switch [P.EQ
Mode]. In the parametric equalization mode,
the frequency, Q value and gain are
adjustable, while in the graphic equalizer
mode, the frequency and Q value are fixed,
and only the equalizer gain can be adjusted.
Refer to “Sync settings page” (page 15).
Setting items:
Preset sound settings
Setting content:
Gain/phase
1 Gain setting: The gain can be adjusted by
directly inputting the value, scrolling the
mouse wheel, the up and down keys on the
keyboard, or clicking “-” or “+”. Adjustable
range: -60dB~6dB.
2 Phase setting: normal phase or reverse
phase switch.
Refer to “X-Over Settings” (page 15).
Setting items:
Preset sound settings
Setting content:
Call/Save/Delete
1 Click [Call] to recall the pre-stored sound
effects.
2 Click [Save] to store the adjusted sound
effect data.
3 Click the right mouse button to delete the
preset sound settings.
TCR
Delay adjustment.
Delay group selection.
Delay value display window.
Setting items:
Delay setting
Setting content:
Delay/Delay group
1 Delay adjustment: The delay can be adjusted
by directly inputting the value, scrolling the
mouse wheel or the up and down keys on the
keyboard.
2 Delay group: select the delay group, and the
channels with the same delay group can be
adjusted together.
Sync Settings
Channel settings
X-Over settings
Preset sound settings
To Next Page
Loading...
Need help?
General
